After the required mileage of the car, it is suitable to adjust the tightness of the generator's belt. The left screw needs to be adjusted and the screws must be adjusted. The screws of the generator's tripod should retain the necessary tightness. The poles of the generator are loose and forced to be tightened immediately. Poor insulation, should be removed for repair.
The generator has a problem halfway, and when it is not too far from the destination, the wires of the voltage regulator passed by the magnetic field coil can be removed.If the generator is brushed, the third one must be brushed down so that the generator does not Generate electricity. Use battery power to supply power, and at this time, you should save electricity as much as possible.
The dust ring on the generator must be strong, and it should not be lost, so as to prevent dust from entering the machine and causing problems with the parts. Always clean the wires and keep them dry to prevent electricity from running. 6. Pay attention to the wear level of the bearing. If you notice that it is not smooth, you can put a few drops of oil from the mouth of the oil cup, and pay attention to the infiltration of the rectifier, otherwise the effect of electric energy transmission will be affected.